background image

Descriptions

A

 professional grade microprocessor-controlled agile audio/video mini-mod-

ulator. This modulator accepts any audio-video baseband television signal and provides a
45dBmV minimum output on CATV channels 2 to 135 (54-860 MHz) while accommodating
HRC and IRC offset frequencies. Channel selection is easily accomplished via channel
up/down buttons located on the front panel while built-in RF muting circuitry prevents inter-
ference during online channel reassignment. 

 

features >-90dB out-of-band

carrier-to-noise ratio, allowing virtually unlimited numbers of 

Mod

’s to be combined in a

system without the need for external bandpass filtering. Up to 12 or 16 units can be installed
“mix-and-match” in 

  c

hassis with

mini-modulators or mini-demodulators. Its unique design

enables it to be installed in other manufacturers’ mini-mod chassis. The unit’s tracking filter
technology and double-heterodyne conversion ensure accurate and spurious-free output.

U

ses SAW filtering in conjunction with FCC group delay correction circuitry to

provide superior adjacent channel selectivity. The unit’s PLL circuitry in conjunction with the
non-volatile memory contained in the microprocessor ensures easy and reliable channel
selection and restoration. The 

 

modulator is shipped with all internal adjustments

preset.

135-Channel Range 54-860 MHz
(CATV 2-135)

>45dBmV min adjustable output
for optimum carrier-to-noise 
performance

Compatible with most manufac-
turers mini-modulator chassis

State-of-the-art digital phase-
locked-loop (PLL) design guaran-
tees precise frequency locking for
solid drift-free operation

Microprocessor control enables
quick digital push-button channel
selection for ease of installation,
configuration, and improved sys-
tem uptime

SAW (surface acoustic wave) 
filtered for superior adjacent
channel performance enables
drop-in channel expansion

BTSC stereo compatible pre-
emphasis disable switch provides
pass-through for stereo signals

In-band carrier-to-noise ratio
>65dB ensures superior picture
quality

Automatic selection of aeronauti-
cal offsets (12.5kHz, 25kHz) for
trouble-free configuration

Front panel access to controls
enables easy setup

IRC and HRC offset available for
frequency settings in systems
using offset channels

PCMA860-HQ

Universal-Chassis Agile A/V Mini-Modulator

Summary of Contents for PCMA860-HQ








Reviews: