background image

08

07

Water inlet installation

Before using

Connect the inlet hose connector with the inlet hose

Check the connection between inlet hose 

connector and the tap

Inlet valve connector

Inlet hose nut

Water absorption cushion

Lock lever

Inlet hose connector 

Slider

1. Push down the slider, insert the inlet hose into the connector
2. Hang the lock lever to the inlet hose connector and  release
    the slider till a click sound is heard.    

1. Swing the inlet hose gently to confirm if it is fastened. 
2. After installation, open the tap and check if it leaks.
3. Do not bend the inlet hose with overstrain. 
4. Before each usage, check the connection between

   inlet hose connector and the tap, and the installation 
   of inlet hose. Make sure they are firmly fitted to prevent
   dropping from improper installation position.

Slider

Lock lever

Connect the inlet hose with the washing machine

1. Do not take off the water absorption cushion. Please 
   check if the cushion is dropped or damaged before
   each usage. If it is, contact the seller immediately.
2. Put the inlet hose nut on the inlet valve connector.
3. Fasten the inlet hose nut and swing it gently to make
    sue if it is suitable.

1. Close the tap.
2. Press the locking lever, push down the slider, and pull of the 
    inlet hose. If the machine is used frequently, the connector
    of the inlet hose can be kept on the tap to prevent damaging 
    the fixing  screw.

Dismantle the inlet hose

Cautions:

W

hen install the washing machine, please use the new hose assy along with the washing  

machine, old hose assy cannot reuse.

Preparation before 

operation

Operation

Preparation before washing
1. Connect the inlet hose and open the tap.
2. This appliance must be earthed. Confirm 
    the socket is earthed reliably and  insert the 
    power plug. The earth terminal should not
    link to gas pipeline, tap pipeline etc.
3. Put down the drainpipe.

Before washing the laundries, please pay attention to the  followings:

Make sure if there is
special requirements
for the laundries

Before washing, empty
all pockets of small
objects which may 
have been left inside
(coins, keys, screws etc.)
As these could damage 
the drain pump.

Knot the long band,
fasten the buttons
and close the zippers.

Do not overload the 
machine. Load the
laundry loosely
alternating large
items with small ones.

Sort the laundry 
according to the type 
of fabric, color-fastness
and how dirty it is. Put 
thin laundries, woolens 
and such prone to wear 
and tear laundries into 
washing bag.

   A. Make sure the laundries are washable.
   B. It is essential to wash new colored items separately when washing for  the first time. White items
         should not be washed with colored items.
   C.  Please immerge the non-absorbable laundries by hand.
   D.  Some stains such as fruit, wine, grass, rust etc. are difficult to remove and should be treated 
         before washing with specific products, which can be found in most household shops. In some 
         cases it may help to soak the stain before washing with a special  pre-soak product or biological
       detergent.
   E.  Over turn the nap fabric and long floss laundries before putting them into the machine.
   F.  Do not put the laundries polluted by chemicals into the machine directly.
   G. Very small item (handkerchiefs, ribbons, socks etc.) should be washed in a washing bag or a pillow case.

Warning: The temperature of the water should less than 50  

Summary of Contents for DWT 260 C LVS+












Reviews: