Dawlance DHG 590 BI, User Manual

Page: 14 / 28

Built-In Hob / User Manual
14 / EN
3 Installation
Product must be installed by a qualified person
in accordance with the regulations in force. The
manufacturer shall not be held responsible for
damages arising from procedures carried out by
unauthorized persons which may also void the
warranty.
C
Preparation of location and electrical
and gas installation for the product
is under customer’s responsibility.
A
WARNING: The product must be
installed in accordance with all local
gas and/or electrical regulations.
A
WARNING: Prior to installation,
visually check if the product has any
defects on it. If so, do not have it
installed. Damaged products cause
risks for your safety.
3.1 Before installation
The hob is designed for installation into commer-
cially available work tops. A safety distance must
be left between the appliance and the kitchen
walls and furniture. See figure (values in mm).
•
It can also be used in a free standing position.
Allow a minimum distance of 750 mm above the
hob surface.
•
(*) If a cooker hood is to be installed above the
cooker, refer to cooker hood manufacturer’ in-
structions regarding installation height (min
650 mm)
•
Remove packaging materials and transport
locks.
•
Surfaces, synthetic laminates and adhesives
used must be heat resistant (100 °C minimum).
•
The worktop must be aligned and fixed horizon-
tally.
•
Cut aperture for the hob in worktop as per in-
stallation dimensions.
Glass
Inox