Important Notices
■ Before installating, please contact a local authorized
maintenance center, if unit is not installed by the authorized
maintenance center, the malfunction may not get solved,due to
discommodious contact.
■
The air conditioner must be installed by professionals according
to the national wiring rules and this manual.
■ To move and install air conditioner to another place, please
contact our local special service center.
Requirements For Installation Position
●
Avoid places with inflammable or explosive gas leakage or where
there are strongly aggressive gases.
●
Avoid places subject to strong artificial electric/magnetic fields.
●
Avoid places subject to noise and resonance.
●
Avoid severe natural conditions (e.g. heavy lampblack, strong
sandy wind, direct sunshine or high temperature heat sources).
●
Avoid places within the reach of children.
●
Shorten the connection between the indoor and outdoor units.
●
Select where it is easy to perform service and repair and
where the ventilation good.
●
The outdoor unit shall not be installed in any way that could
occupy an aisle
,
stairway, exit, fire escape, catwalk or any other
public area.
●
The outdoor unit shall be installed as far as possible from the
doors and windows of the neighbors as well as the green plants.
Requirements for Operations at Raised Height
●
When carrying out installation at 2m or higher above the base
level, safety belts must be worn and ropes of sufficient strength
be securely fastened to the outdoor unit, to prevent falling that
could cause personal injury or death as well as property loss.
Notices for installation
Electrical Safety Requirements
● Be sure to use the rated voltage and air conditioners dedicated
circuit for the power supply, and the power cord diameter must
meet the national requirements.
● When the maximum current of air conditioner is ≥ 16A, it must use
the air switch or leakage protection switch equipped with
protection devices.
● The normal operating range is 90%-110% of the local rated voltage.
● The minimum clearance between the air conditioner and the
combustibles is 1.5 m.
● The air conditioner is the type
I
electrical appliance and must
ensure a reliable grounding.
● Do not connect the grounding wire to a gas pipe, water pipe,
lightning rod, telephone line, or a circuit poorly grounded to
the earth.
● The grounding wire is specially designed and shall not be used
for other purpose
,
nor shall it be fastened with a common
tapping screw.
Grounding Requirements
Requirements of the Mounting Structure
● The mounting rack must meet the relevant national or industrial
standards in terms of strength with welding and connection
areas rustproofed.
● The mounting rack and its load carry surface shall be able to
withstand 4 times or above the weight of the unit or 200kg -
whichever is heavier.
●
The mounting rack of the outdoor unit shall be fastened with an
expansion bolt.
●
Ensure the secure installation regardless of what type of wall
on which it is installed, to prevent potential dropping that could
hurt people.
Notices for installation
12
13
Summary of Contents for Classic Plus 15
Page 13: ......
