Quick Guide
- 18 -
/!SN=x,..,x
This parameter defines the devices that are to run in asynchronous
instead of in synchronous mode, independent of the Windows mode
setting for these devices. Hostadapters supplied with a SCSI setup ignore
this parameter and use the setup settings instead.
/SN=x,..,x
This parameter specifies the devices to be operated in Synchronous Data
Transfer mode if this mode is supported by these devices, independent of
the Windows settings. Entering "/SN=1,4", for example, enables the
synchronous mode for SCSI-IDs 1 and 4. Hostadapters supplied with a
SCSI setup ignore this parameter and use the setup settings instead.
/!DISC=x,..,x
Specifies the devices for which the "disconnect" settings of
Windows´device manager are to be ignored and with it this function is not
available.
Summary of Contents for DC-2964 F
Page 27: ...Br ve notice 27...
Page 28: ...Br ve notice 28...
