6
Installation
Remove any packaging material and printed matter from inside the oven.
Place the appliance on a level, dry, heat
– resistant surface at a height of approximately 100cm.
Do not place the appliance in a cupboard.
The sides of the appliance may become hot during use, therefore an empty space of about 10cm all around is
required.
Make sure that the oven door opens easily, without being obstructed by any objects.
To install the appliance you will need an earthed Shuko plug of 220-230 V, with a 16
Α fuse (2,5 mm
2
line).
If you use an extension, it should be 3
Χ2,5 mm
2
and earthed. If the indicator lights show a faint flicker, turn the plug
in the socket.
Do not remove the plug from the power supply cord, as the appliance is not designed to be permanently connected to
the electrical power supply.
Unplug the appliance after each use and during cleaning.
Connecting to electricity
The applianceoperates with an AC power supply of 220-230 V/ 50 Hz. For this reason, check whether the electrical
circuit you will be using meets with the above
– mentioned requirements.
Check whether the electrical outlet you will be connecting the appliance to is earthed. If you use an extension, check
that the extension line is also earthed.
The total power level during operation is:
Model
Hotplate 1500 W Hotplate 1000 W Hotplate 450 W
Electrical power
Super 1505T
1,2 kW
Super 3505
x
x
3,15 Kw
Super 4005
x
x
2,7 Kw
Super 4505
x
x
x
3,15 Kw
This appliance has been manufactured according to the EC Directives 73/23/
ΕΟΚ, 90/396 και 93/68 with a type B fire
protection grading.
