--SAVE THESE INSTRUCTIONS--
6.
When the room reaches the desired temperature, slowly turn the thermostat knob
anticlockwise until you hear a click. This will automatically set your unit to cycle on
and off to maintain the current room temperature thermostat setting. Note: It will
normally require approx. 15 minutes to reach the operating temperature.
NOTE:
The lower the thermostat setting, the lower the room temperature. The higher
the thermostat setting, the higher the room temperature.
7.
To turn off the heater, press the power switches to “O” position. The power indicator
light turns off.
8.
Unplug the product from the electrical outlet when it is left unattended or is not in use.
Care and Cleaning:
CAUTION:
Allow the product to completely cool before handling or cleaning it.
Ensure the product is in the “O” (OFF) position and the Power Cord is unplugged from
the electrical outlet before cleaning the product.
•
Always ensure the product’s housing is intact and completely assembled before each
use.
•
Do not touch hot surfaces. Always use the handle of the product. Use protective
mitts or gloves to avoid serious burns or other personal injury.
•
Clean the exterior surface of the product by wiping it with a soft, damp cloth.
CAUTION:
Do not allow water or other liquids to run into the interior of the product, as
this could create a fire and/or electrical hazard.
•
Do not use any abrasive cleaners or solvents, as product damage will occur.
•
Store the product in a clean, dry place when it is not in use.
Conformity with Directives
This product is CE marked to denote conformity with Directives 73/23/EEC(Low
Voltage) and 89/336/EEC (Electromagnetic Compatibility), as amended.
Environmental Protection
Waste electrical products should not be disposed of with household waste.
Please recycle where facilities exist. Check with your Local Authority or
retailer for recycling advice.
