background image

When using an electrical appliance, basic safety precautions should always be 
observed, including the following: 
READ ALL INSTRUCTIONS BEFORE USING 

WARNING: To reduce the risk of fire, electrical shock, or injury to person: 

1.  The product is for household use only.   

2.  The meaning of figure 

  in marking is “DO NOT COVER”.   

3. Connect the appliance to single-phase AC supply of the voltage specified on 
the rating plate. 
4. In order to avoid overheating do not cover the heater. 
5. Never leave the heater unattended while it is in use. Always turn the product 
to the OFF position and unplug it from the electrical outlet when not in use. 
6. Extreme caution is necessary when any heater is used by or near children, 
invalids or elderly person and whenever the heater is left operating and 
unattended. 
7. The heater must not be located immediately below an electrical 
socket-outlet. 
8. Do not run cord under carpeting and do not cover cord with throw rugs, 
runners or the like. Arrange cord away from traffic area and where it will not be 
tripped over. 
9. Do not operate the heater with a damaged cord or plug, or after the heater 
malfunctions, has been dropped, or damaged in any manner.   
10. If the supply cord is damaged, it must be replaced by the manufacturer, its 
service agent or a similarly qualified person in order to avoid a hazard. 
11. Avoid the use of an extension cord as this may overheat and cause a risk 
of fire.   
12. Use the heater in a well-ventilated area. Do not insert or allow objects to 
enter any ventilation or exhaust opening. To prevent a possible fire, do not 
block air intakes or exhaust openings in any manner. Do not use on soft 
surfaces, like a bed, where openings may become blocked. Use the heater on 
flat, dry surfaces only. 
13. Do not place this heater near flammable materials, surfaces or substances, 
as there may be a risk of fire. Keep the above flammable materials, surfaces or 
substances at least 1m from the front of the product and keep them away from 
the sides and rear. 
14. Do not use the heater in any areas where petrol, paint or other flammable 
liquids are stored e.g. Garages or workshops as a hot, arcing or sparking parts 
inside the heater.   
15. Don’t use this heater in the immediate surroundings of a bath, a shower or 
a swimming pool. Never locate the heater where it may fall into bathtub or 
other water container. 
16. This heater is hot when in use. To avoid burns and personal injury, do not 
let bare skin touch hot surfaces. If provided, use handles when moving the 
product. 

Summary of Contents for DQ713








Reviews: