We configure the parameters of 4-20mA sensor in I2C Sensor tab:
I2C: sample_rate
(sec)
sensor reading cycle, e.g: 60 seconds.
I2C: calc_time (ms)
time of supplying power to the sensor before reading the I2C, e.g: 200 ms.
I2C: num_of_sample
The number of ADC samples taken in a reading of sensor data, the more samples the
longer the sensor reading time.
For example: 8 samples with each sample have a reading time of 10ms, then the total
sampling time is 80ms.
I2C: prm1_a
The a constants after calculation according to the formula
5.5 Configure sensor parameters on the iConnector
5.5.1 Configure I2C_Sensor tab
