Choose COM Port (the Port which is USB cable plugged in)
Set the BaudRate: 9600, Parity: none
Click “ Connect “ untill the Status displays “disconnected” to “connected“. It means the WS433-CL-04 is
being connected with computer;
Next, we need to import the configuration file for WS433-CL-04 by importing the csv file: Go to MENU:
FILE /
Import New / => select the file with name Template_WR433_V1.6.csv. This file is attached in the zip file.
Step 2: Check information of sensor after adding S/N of each sensor
Configuration
Protocol: Modbus RTU
Address: 1 - 247
Baud rate: 4800, 9600 , 19200, 115200
Parity: none, even, odd
Stop bits: 1
Memmap resgisters
You can download Modbus Memmap of WS433-CL-FW_V1.9 with the following link:
http://filerun.daviteq.com/wl/?id=q64HsdUTIamRdNWIIi7kiBdrcJbmhCkX
The mounting bracket is made from hard metallic material. Following to these steps as the below picture
6.2 Modbus communication
7. Installation
7.1 Mounting bracket installation
