1.5.1 GUI Access
Once gateway is turned on through plugging in the adapter, it will become a local wifi access point.
To access the GUI, follow these steps:
Step 1:Connect to Micro Gateway via local wifi (SSID: on the gateway label).
Step 2: Enter the default IP address (192.168.55.1) of the gateway in the web browser to access the configuration
interface.
1.5.2 WAN configuration
The purpose of this category is to view current WAN settings. This category is further divided into three sub- sectors:
WAN Status, Ethernet Wan and Wireless Extender. These individual options are lodged and labeled above the main
content panel.
WAN Status
The current network status will be shown on this page.
Ethernet WAN
1.5 Configure the LoRaWAN Gateway
The default username is “admin” and the password is "admin“.