Startup the LoraWAN Gateway through the following steps
Install the antenna in the correct position. Make sure the antenna and Gateway are tightly connected.
Connect the Ethernet cable into RJ45 port of the gateway and the port of Ethernet network. After that, connect the
power adapter provided to the Micro USB port. The gateway will automatically turn on after powering up.
Only use for troubleshooting
1.4 Installation
Step 1: Install the antennas of the LoRaWAN Gateway
Step 2: Connect the Ethernet cable and power up the Gateway
Note: If the gateway use WiFi mode connect to Network Sever, Skip connect the Ethernet cable