4
Setup
1.
Determine if you have the RS232 port available on your PC
2.
Setting up as a tracking device
3.
Installation of Microsoft.NET ver 1.1
4.
Installation steps for MTS application
5.
Setting up as a modem
6.
Google Earth Plus installation
7.
Appendix
1. Hardware setup of the tracking device
2. Determine if you have the RS232 port available on your PC
Fig.1
Fig.2
Using serial communication
Connect the communication cable to the
RS232 port of your PC
By default, it is recommended to use the communication cable to interface from the tracking device/modem to your PC. It is not required to
install any software drivers to your computer when using this method.
If the RS232 port is already available on your PC, connect it as in fig.2.
If the RS232 port is not available on your computer, please go to page 5 to and refer to fig.3.
Step 2
Tracking device
Power adaptor
Step 1
Communications
cable to PC
Connect the device as displayed in the
picture
Power up the device.
SIM card
Tracking device
Li-Polymer
Battery
Insert the SIM card (Not included in the package)
Connect the Li-Polymer battery
Place the back cover to the tracking device
*Important:
Take note of the SIM card number of the
tracking device
500206R01
