manualshive.com logo in svg

DAVIS Weather Echo, Install Manual

Share
Download
DAVIS Weather Echo Install Manual Download Page 3

 

Locating the Weather Echo/Weather Echo Plus

Page 3

 

L

 

OCATING

 

 

 

THE

 

 W

 

EATHER

 

 E

 

CHO

 

/W

 

EATHER

 

 E

 

CHO

 

 P

 

LUS

 

Try to position the Echo or Echo Plus display and the host station transmitter as 
close as possible for best results. The typical maximum ranges are as follows:

 

✦

 

Through walls and ceilings: 100 to 200 feet (30 to 60 m)

 

✦

 

Through trees and foliage: 100 to 200 feet (30 to 60 m)

 

I

 

NSTALLING

 

 

 

THE

 

 W

 

EATHER

 

 E

 

CHO

 

/W

 

EATHER

 

 E

 

CHO

 

 P

 

LUS

 

The Echo and Echo Plus comes supplied with a 3 Volt Lithium battery.

 

To install the battery: 

 

1. Remove the battery cover on the back of the display.

2. Insert the battery in the appropriate direction in the battery compartment.

 

INSTALLING

 

 

 

THE

 

 B

 

ATTERY

 

3. Reattach the battery cover.

 

Note:

 

The battery life is 10 to 12 months in normal mode and 10 to 14 months in power savings mode. 
With Echo Plus, use the battery supplied for a totally wireless operation, or use the power 

 

adapter supplied. The adapter powers the Echo Plus’ backlight function also.

3 Volt

Lithium Battery

Battery

Cover

Summary of Contents for Weather Echo

























Reviews:

No comments

Brands by name

Popular brands

Load more brands