Selecting Units of Measure
22
Outside and Inside Temperature
1. Press TEMP to select outside temperature.
Temperature may be displayed in degrees Fahrenheit (ºF) or
Celsius (ºC). Temperatures can also be displayed in degrees or in
tenths of a degree.
2. Press TEMP again to select inside temperature.
Each consecutive press of TEMP displays temperature readings for any optional
temperature, temperature/humidity, soil temperature, soil moisture stations also
connected to your console. The order of the optional sensors readings display
depends on your station configuration. Temperatures for temperature stations
display, with soil temperature and moisture stations displaying consecutively.
Humidity
Press HUM to select outside humidity. Pressing HUM a second time
selects inside humidity. Humidity is displayed in percent relative humidity. Each
consecutive press of HUM displays humidity readings for any optional humidity,
leaf wetness, and leaf temperature stations also connected to your console. The
order of the optional sensors readings display depends on your station
configuration. Humidity readings for humidity stations display, with leaf wetness
and leaf temperature readings displaying consecutively.
Wind Chill
Press 2ND then press CHILL to select Wind Chill. Wind Chill
is displayed in either Fahrenheit (ºF) or Celsius (ºC) in whole
degrees.
The console uses the ten-minute average wind speed to calculate wind chill.
Dew Point
Press 2ND then press DEW to select Dew Point. Dew Point is
displayed in either Fahrenheit (ºF) or Celsius (ºC) in whole
degrees.
TEMP
N
W
NE
SE
SW
Vertical Scale: X10
WIND
RAIN
YEAR
in
TEMP OUT
HUM IN
HUM OUT
DAILY RAIN
in
TEMP IN
hPa
BAROMETER
STATION NO.1
F
F
F
MPH
Last 24 hrs
hr
Every1
S
E
NW
pm
HEAT INDEX
HUM OUT
HUM IN
CHILL
F
DEW POINT
F
hPa
BAROMETER
Humidity, Pressure, Dew Point & Wind
HUM
DEW
2
ND
WIND
CHILL
2
ND
HUM
DEW
Summary of Contents for Vantage Pro2 Plus
Page 59: ......
