Page 19
You have the following options from the Trip Acceleration/
Deceleration Log Screen:
❏
Toggle Between Driver ID Code and Date Dis-
play
You may display either the current driver ID
code or the date. To toggle between the two,
press and release SET/CLEAR.
❏
Page Through Stored Trip Information
Press MINUS to page backward through stored
trip information. Press PLUS to page forward
through stored trip information. Hold the but-
ton down to increase the speed at which the
Trip 500AL pages. When you reach the first or
last stored trip, the Trip 500AL will no longer
page in that direction.
Odometer Screen
The Odometer screen displays the vehicle’s odometer reading
and the next service alarm mileage, both of which must be set
from the DriveRight Vehicle Management Software. The
odometer reading is spread across the two digit registers at the
bottom of the screen and may take some getting used to (the
odometer reading in the screen shown below is 5,812.2 km).
The displayed service alarm mileage must be multiplied by
1000 to determine the mileage at which service is next
required for the vehicle (in the example below, service is next
required at 6,000 km).
Odometer Screen
NOTE:
The odometer readings is ALWAYS shown in the unit of measure
in which it was entered. To change the unit of measure in which
it is displayed, you need to reenter the odometer reading using
the software.
DISTANCE
Km
Next Service Alarm Mileage (6,000 km)
Odometer Reading (5,812.2 km)
