6
© 2020 Davis Packaging : DPM39-0320ARef
Basic Wrapping Technique
P: 800.622.3015 / 561-290-0412 □ E-mail: [email protected]
www.davispackaging.net
7. Place left hand on top right side edge of
bundle to hold secure. Use right hand to pull
right side of film out to straighten, then up and
over top of bundle. Pull less for delicate linens
to avoid wrinkles.
8. Repeat using opposite hands to finish left
side of bundle.
Seal Option 1: Hot Plate
Flip bundle over and place
folded seams on hot plate until
fully sealed. Adjust thermostat
knob so bundle can sit without
melting holes in film and seams
are secure.
Seal Option 2: Hand Iron
Use iron as necessary to tack
all bundle seams. Iron should
be hot enough to weld film to
itself without melting holes in
film.
Finished Bundle
Seams should be tack welded
to the point that a finger nail
across the seam will not
separate or easily open. Raise
thermostat heat if easily pealed
open or lower if melt holes exist.
