3
Attach the Wind Cups
1. Push the wind cups up onto the anemometer’s stainless steel wind cup shaft.
2. Slide the wind cups up the shaft as far as possible.
3. Use the Allen wrench provided to tighten the set screw on the side of the wind
cups.
4. The wind cups should drop slightly when you let go.
5. Ensure that the set screw is screwed in fully and very tight. Failure to do so
will cause the anemometer to function improperly.
6. Spin the wind cups.
7. If the wind cups spin freely, the anemometer is ready for installation.
If the wind cups don’t spin freely, take them off and repeat the wind cup
installation process.
Tighten set
screw with
Allen wrench
Push cups onto
stainless steel
shaft
Wind cup shaft
Summary of Contents for 6410
Page 2: ......
