Page 16
Solar Radiation Shield Manual
A
TTACHING
M
OUNTING
B
RACKET
TO
THE
T
OP
OF
A
P
OST
Mounting on Top of a Post
In order to mount the Solar Radiation Shield onto the top of a post, you will
need the Solar Radiation Shield assembly (with mounting bracket already
attached). You will need to supply four 1/4” x 1 1/2” lag screws.
To mount the Solar Radiation Shield, simply use the four 1/4” x 1 1/2” lag
screws (not included), to attach the mounting bracket to the mounting surface
in the desired location.
M
AINTENANCE
I
NSTRUCTIONS
✦
The effectiveness of the Solar Radiation Shield will be reduced if the surfaces of
the shield become dirty. Wipe the surfaces of the shield using a damp cloth to
remove dirt etc.
✦
Keep areas between Solar Radiation Shield plates free of debris that may obstruct
air flow e.g., leaves, twigs, webs, nests. DO NOT remove nesting insects or animals
by spraying insect killer of any kind into the Solar Radiation Shield because this
may damage the sensors and the Solar Radiation Shield.
© Davis Instruments Corp.
2000. All rights reserved.
