Davis Instruments Long-Range Repeater Installation Manual Download Page 6

4

Yagi (Directional) Antenna (#7660)

The Yagi antenna includes the directional antenna and mounting hardware:

Antenna Uses

The Omni and Yagi antennas transmit and receive with two different radiation patterns. 

The long range omni antenna transmits and receives data using the same radiation pattern 
as a standard Vantage Pro2 dipole antenna. The Yagi antenna transmits and receives data 
packets in a 50

°

 beam of the front of the Yagi antenna. The antenna is limited in the angle 

and direction it can transmit and receive packets, but it increases the distance between 
station, repeater, and receiver proportionally.

All wireless Davis Instruments stations and standard wireless repeaters come equipped 
with standard dipole antennas that have an omni-directional radiation pattern.

To determine which antenna or antenna combination is needed for your network:

Use an omni antenna if receiving or transmitting in multiple directions.

Use a Yagi antenna if receiving from or transmitting to stations within a 50° angle of 
the antenna.

Note: 

The best Yagi antenna performance is always achieved by pointing the antenna directly at the 
antenna at the other end of the link

Yagi Antenna

5/16"

U-Bolts

48"

Antenna

Cable

Flat Washer

Lock Washer

Nut

External Antenna Radiation Patterns

(radiation pattern 360   )

)

)

)

)

)

)

)

)

)

)

)

)

)

Omni-Direction Antenna

(radiation p/- 25  ) 

Yagi Antenna

)

)

)

)

(Top View)

Summary of Contents for Long-Range Repeater

















Reviews: