Outside and Inside Temperature
Health EnviroMonitor Manual
Page 27
4. Continuing to press TEMP will cycle through the outside and inside temperature dis-
plays in a continuous loop.
Selecting Units of Measure
To select the desired unit of measure, simply press UNITS while viewing
any of the temperature displays (except AutoClear). As you press UNITS,
the Health EM cycles through the available units and resolutions in the fol-
lowing order: 1˚F. 0.1˚F, 1˚C, 0.1˚C. All temperature information (including
apparent temperature, wind chill, and dew-point) will appear in the units of
measure you select.
S
AMPLE
U
NITS
OF
M
EASURE
High and Low Temperature
The Health EM displays the high and low outside and inside temperature
along with the time at which it occurred. For information on displaying and
clearing highs and lows, see “Highs and Lows” starting on page 40.
Alarms
You may set a high and a low alarm for outside and inside temperature. (See
“Alarms” on page 42.)
Summary of Contents for Health EnviroMonitor
