background image

Testing the Rain Collector II

6

If the rainfall amount displayed on the console increases by the expected increment 
(either 0.01" or 0.2 mm) each time you tip the bucket, your rain collector is working 
properly. If the display changes only after you tip the bucket several times, the rain 
collector may be functioning correctly but you may have an older version of the 
station console. See “Calibration of Older Model Weather Stations” on page 14 for 
details.

Installing the Rain Collector II

Note:  Climbing on your roof may be hazardous. If you are uneasy about installing your unit please have a qual-

ified professional complete the installation. Davis specifically disclaims any liability for injury or loss 
resulting from the installation or use of the Rain Collector II.

Follow the instructions in this section to install your rain collector. Make sure you read 
“Choosing a Location for the Rain Collector” on page 5 as it contains important informa-
tion concerning placement of the rain collector.

Typical Weather Monitor II Installation

The illustration below shows a typical rain collector installation for the Weather Wizard 
III and Weather Monitor II.

Typical Installation

Summary of Contents for 7852

















Reviews: