Installing the Daytime Fan Kit
9
12. Place one of the 4
'' screws
removed from the original radiation shield
and its corresponding
#8 lock washer and # 8 flat washer into one of the
radiation shield plate holes on the fan plate located just counter-clock-
wise from a threaded spacer, making sure the screw goes through the
boss in each of the plates and lines up with the threaded insert located
in the bottom plate.
13. Turn the screw a few times to engage the threaded insert in the bottom
plate.
Fan Plate
#8 Flat Washer
#8 Lock Washer
#8-32 x 4" Screws (3)
Threaded Insert
in Bottom Plate
Screw Boss
Install Fan Plate
Summary of Contents for 7747
Page 15: ...Troubleshooting 15...
