page 15
Toddler bed Conversion - Assembly Instructions
* All of the parts and hardware you will need is
supplied with the crib at the time of purchase.
Unscrew the Allen head bolts and
remove the front panel assembly.
Move the spring frame to the lowest level.
Attach the guardrail (L) to the front posts using
four Allen head bolts (H22) and lock washer
(H23). The guardrail (L) can be installed with
the high end facing either to the left or the
right.
Check to make sure that all of the bolts are
fastened securely.
DO NOT OVERTIGHTEN.
The mattress intended for use on the bed is to have minimum dimensions of :
51 5/8 x 27 1/4 x 4 inches thick.
WARNING:
The minimum age to use toddler bed conversion rail shall not be less than 15 months and the
maximum weight shall not be greater than 50 lbs.
Failure to follow these warnings and the assembly instructions could result in serious injury or
death from entrapment or strangulation. Do not place the bed near windows where cords from
blinds or drapes may strangle a child.
If guardrails are used as the mattress containment means, the guardrails provided must be used
to avoid the formation of a gap between the mattress and the bed that could cause an entrapment.
STEP 1.
H22
L
STEP 2.
STEP 3.
H22
H22
H23
H23
L. Guardrail
H23
