DaVinci LED Power Supply
sku# 250-05849
Page 2 of 3
17602224 - 9/13/2021
© Travis Industries, Inc.
Second Generation Power Supply
3. Crimp the connectors included with this kit on to the LED XFMR wires
IMPORTANT
Crimp the male connector on to the BLACK wire and the female connector
on to the WHITE wire
IMPORTANT
4. Install the replacement power supply into the location of the previous power supply. The power supply
should be oriented so the label is facing upward. Secure the power supply in place using the included
wire tie and Velcro strips.
POLARITY DOES MATTER. The BLACK
LED
wire to the RED power supply wire. The
WHITE LED wire to the BLACK power supply wire.
5.
Restore the fireplace to its correct configuration.
Connect to
“Power In”
Disconnect
LED XFMR
Connect LED XFMR wires
(BLACK to RED, WHITE to BLACK)
Disconnect “Power In”
& discard
