background image

DAVINCI GLIDERS / TANGO

1

Congratulations!
Thank you for choosing the TANGO

The TANGO has been designed for who are willing to progress in 
the sport safely, chasing their first XC flights but who are also com-
fortable with the technical control of this type of glider.
The TANGO is an easy and fun paraglider with excellent glide and a 
very efficient speed system designed as a EN-C class glider.

 

This manual will help you to get all information about your 
glider. We strongly recommend that you read this manual 
carefully in order to be aware of any general limitations, 
performance characteristics, take off and flight character-
istics, landing procedures, dealing with emergency situa-
tions and general maintenance.

This is information about the design of the TANGO, advice how to 
use it best and how to care for it to ensure it has a long life, We hope 
that the TANGO will give you a lot of satisfactory flying times.

WARNING!

THIS IS NOT TRAINING MANUAL. ATTEMPTING TO FLY THIS 
OR ANY OTHER PARAGLIDER WITHOUT PROPER INSTRUC-
TION FROM A CERTIFIED PROFESSIONAL INSTRUCTOR IS 
EXTREMELY DANGEROUS TO YOURSELF AND BYSTANDERS.

DAVINCI GLIDERS are carefully manufactured and inspect-
ed at the factory. Please use the glider only as described in 
this manual. 

Do not make any modifications to the glider. 
As with any sport – without taking the necessary safety pre-
cautions, paragliding can be dangerous.

Congratulations!

-DAVINCI GLIDERS TEAM-

Summary of Contents for TANGO XS






















Reviews: