DAVINCI GLIDERS Point, User Manual

Page: 28 / 33

AIR TURQUOISE SA | Rte du Pré-au-Comte 8 | CH-1844 Villeneuve | +41 (0)21 965 65 65
Test laboratory for paragliders, paraglider harnesses and paraglider reserve parachutes
Line and Riser Measurements of flight test Paraglider
(1)
Report No. : Sample name: Date measure:
Place:
Manufacturer: S/N: Responsible:
Linked:
Total line length including risers [mm] Main brake line with diff color than A,B,C main line? Yes
+strap
Manu
(2)
Sample
Diff Manu
Sample
Diff Manu
Sample
Diff Manu
Sample
Diff Manu
Sample
Diff Manu
Sample
Diff Manu
Sample
Diff
Sample
Center
1 7065 7077 12 7004 7003 -1 7060 7055 -5 7129 7121 -8 6331 6323 -8 7258 7259 1
2 7024 7035 11 6953 6949 -4 6969 6960 -9 7037 7023 -14 6372 6375 3 7058 7062 4
3 7082 7093 11 7001 6997 -4 6987 6981 -6 7045 7032 -13 6940 6944 4
4 7035 7041 6 6949 6943 -6 6949 6937 -12 7006 6992 -14 6897 6903 6
5 7031 7040 9 6941 6936 -6 6972 6961 -11 7024 7015 -9 6782 6785 3
6 7012 7027 15 6914 6912 -2 6912 6904 -8 6955 6945 -10 6678 6681 3
7 6999 7013 14 6902 6909 7 6881 6875 -6 6920 6910 -10 6656 6659 3
8 6977 6990 13 6882 6878 -4 6865 6856 -9 6901 6890 -11 6730 6734 4
9 6952 6963 11 6862 6858 -4 6866 6857 -9 6898 6887 -11 6543 6548 5
10 6918 6919 1 6831 6831 0 6838 6837 -1 6861 6859 -2 6451 6455 4
11 6865 6866 1 6786 6785 -1 6782 6778 -5 6804 6802 -2 Stab line to riser: 6362 6374 12
12 6732 6730 -2 6676 6677 1 6691 6687 -4 6716 6711 -5 B
13 6646 6644 -2 6595 6595 0 6634 6632 -2 6653 6650 -3
Wing
14 6423 6408 -15 6451 6454 3
tip
15 Number Cell: 36
16 Weight of the glider [kg]: 4.80
17
18
Tolerance [mm]
(4)
:
±15
Riser measurement - total length (inner edge) [mm]
(3)
Acc system configuration max travel Test Atmosphere AGL
Risers Std Acc Trim Risers Std Acc No. of risers 3 Pressure [hPa] 983.9
A
530 423 n/a
A
500 393
Tolerance [mm]
5 Humidity [%] 38
A'
530 424 n/a
A'
500 394 Temperature [°C] 21.5
B
519 443 n/a
B
489 413 Carabiner [mm] 30
C
503 503 n/a
C
473 473
Tolerance [mm]
2
D
n/a
D
Plausibility check :
Acc
107 *[mm]
Acc
107 *[mm]
*Travel range (distance [mm] 500
500
Trimmer
n/a [mm]
Trimmer
n/a [mm]
between A and rear riser)
Another trim configuration No
[mm] 10000
10002
If yes (description): Remark:
Instrument validity date
Laser distance meter 07.09.2023 Uncertainty of instrument [mm] 3
Line measurements system 07.09.2023
(3)
Risers, Std=Trim speed, Acc=Accelerated, AND if trimmer: Open=trimmer open, Closed=trimmer closed, Trim=measured at this position.
(4)
Tolerance line and riser is +/-15 [mm]
Total
length
(incl.
Carabiner
or
connect)
Total
length
(no cara-
biner or
con-
nect)
Present inspection’s scope only extends to the conformity of a given sample, on a given date and in a given place – as mentioned here above. The validation of this report is given by the signature of the test manager on inspection certificate 71.8.1
(1)
Total length measured from the underside of the glider to the inner edge of the risers with a tenstion of 50 [N]. Measured values do not include the uncertainty/The uncertainty stated is the expanded uncertainty obtained by multiplying the standard uncertainty
by the coverage factor k = 2. The measured values lies within the assigned range of values with a probability of 95%.
(2)
Manu=Values from manufacturer, Sample=Measured by inspector.
Villeneuve
ISO 91.20
A B C D E Stab Brake
PG_1618.2019
Davinci Point S / close trimmer
AT-S10850-PRW 28.01.2020
Claude Thurnheer
RE | rev 17 | 11.10.2019 Page 1 | 1 ISO | 91.24