GD-04 DAVID
MKS51200_OS1
12
Relays X and Y operation
SMS to switch relay ON
ARX, xxx..x
Use
ARY
for relay
Y
.
xxx..x
= text (up to 30
characters), text erased by
ARX, ,
Example:
ARY,ventilator on
erased
SMS to switch relay OFF
DRX, xxx..x
Use
DRY
for relay
Y
.
xxx..x
= text (up to 30
characters), text erased by
DRX, ,
Example:
DRY,ventilator off
erased
Relay switch-on period
TMX, t..t
Use
TMY
for relay
Y
.
t..t
= switch-on period in seconds, or zero
•
1 to 36000 (10h): the relay works as a time-
switch, activated via switch-on SMSes or
dialling-in, deactivated by time-limit expiration
or via switch-off SMSes.
•
0: no time-limit applies, dialling-in is responded
to with toggle logic: on – off – on…
0
(no limit)
Telephone numbers
authorised for relay control
ADX, x..x,x..x
Use
ADY
for relay
Y
.
x..x
= tel. number. Up to 50 numbers can be entered
(in a single instruction or gradually). The numbers are
added to the list of authorised numbers. Example:
ADX, 777123456, +420608503211
authorises two
new numbers for relay X control.
Telephone numbers
authorised for relay control
with a validity limit.
LDX, x..x,n,
x..x,n
Use
LDY
for relay
Y
.
x..x
= tel. number. The numbers are added to the list of
authorised numbers, up to 50 in total.
n
= limit in the number of calls (1 to 99), exceeding the
limit removes the number from the list – this is reported
to the service number by SMS.
Example:
LDX, 777123457, 31
authorises a new
number for relay X control for a maximum of 31 calls.
empty
list
Erasing tel. numbers
authorised for relay control
EDX, x..x, x..x
Use
EDY
for relay
Y
.
x..x
= tel. number. The
numbers (up to 50) are removed from the list.
Example:
EDX, 777123457
de-authorises a single
tel. number used for relay X control.
–
Input A to D activation/deactivation SMS reports
Input activation text
ATA, xx..x
Use
ATB
for input
B
, etc.
xxx..x
= text (up to 30 characters*)
Example:
ATC, heating on
Instruction
ATA , ,
erases the text = no reports
A1,
B1,
C1,
D1
Input deactivation text
DTA, xx..x
Use
DTB
for input
B
, etc.
xxx..x
= text (up to 30 characters*)
Example: D
TC, heating off
Instruction
DTA , ,
erases the text = no reports
A0,
B0,
C0,
D0
Telephone numbers for
input reports
TNA, x..x, x..x
Use
TNB
for input
B
, etc.
x..x
= tel. number, up to 8 for each input. All
previously stored numbers are erased. Use
TNA,
to empty the list.
Example:
TND, 777123456, 608123456
sets
David to report input D events to 2 numbers
empty
list
Input-event calls
DNA, n
Use
TNB
for input
B
, etc.
,
n
= 1 (ON), 0 (OFF). If
set to ON, every SMS report is followed by a call.
If you answer the call, you hear a constant tone =
activation, or an interrupted tone = deactivation.
Example:
DND, 1
OFF
