19532P-76 (09-15)
of 22
22
Troubleshooting
Symptom
Possible Cause(s)
Cannot hear any
audio in headset(s)
1. Power to system turned on?
2. System Volume setting up to an audible level?
3. Radio Volume settings up to an audible level?
Cannot speak over
intercom
1. Power to system turned on?
2. Belt Station IC/RAD switch in IC mode? If so, need to PTT for intercom
No (or low) radio
receive audio
1. Power to system turned on?
2. Radio turned on?
3. Radio’s volume setting up to an audible level (on radio)?
4. Check radio settings/wiring.
No boat radio
transmit
1. Power to system turned on?
2. Radio turned on?
3. Belt Station IC/RAD switch in IC mode? Must be in RAD mode.
4. Check radio settings/wiring.
No handheld
radio transmit
1. Power-off and then power-on the handheld radio
Too low or too high
radio transmit audio
2. See
Appendix D
for adjustment information.
Belt Station not
receiving/transmitting
1. Check above suggestions
2. Check Belt Station wiring
Other audio level
problems
1. See
Appendix D
for adjustment information.
Summary of Contents for 9500 SERIES
