AT Command Set
Preliminary
8
Order No. DM336P-002-01
Version : DM336P-AT-P04
on-hook ratio.
&Rn
Clear To Send (CTS) Signal Selection.
&R0
Modem turns on the Clear To Send signal
when it detects the Request To Send (RTS)
signal from host.
&R1
Modem ignores the Request To Send signal
and turns on its Clear To Send signal when
ready to receive data.
&R2* Clear To Send force on.
&Sn
Data Set Ready (DSR) Signal Selection.
&S0* Data Set Ready is forced on.
&S1 Data Set Ready to operate according to RS-
232 specification.
&Tn
Test Selection.
&T0*
Terminates test in progress.
&T1
Performs Local Analog Loopback Test.
&V
Configuration Profile Display Selection.
&Wn
Active Configuration Profile Store Selection.
&W0*
Stores active configuration profile in
configuration profile 0.
&W1
Stores active configuration profile in
configuration profile 1.
&Yn
Selection of the Active Configuration After
Power-On or Reset.
&Y0*
Retrieves configuration profile 0 as the
active configuration profile when the Modem
is turned on or is reset.
&Y1*
Retrieves configuration profile 1 as the
active configuration profile when the Modem
is turned on or is reset.
&Zn=x
Store Telephone Numbers in Nonvolatile
Memory. Stores three telephone numbers, 31 characters each, in the non-volatile memory.
Uses ATDS=n to dial or to use AT&M2 for
synchronous data mode.
*Gn
Adaptive Handshake Selection.
*G0
Disables adaptive protocol handshake.
*G1*
Enables adaptive protocol handshake.
*Nn
Connect Speed Selection.
*N0
Selects connect speed 1200bps.
*N1
Selects connect speed 2400bps.
*N2
Selects connect speed 4800bps.
*N3
selects connect speed 7200bps.
*N4
Selects connect speed 9600bps.
*N5
Selects connect speed 12000bps.
*N6
Selects connect speed 14400bps.
*N7
Selects connect speed 16800bps.
