USER’S MANUAL
MA30-02/A
4
2. INSTALLATION
Before putting the device into use, please read with care the information given in the Operating Instructions.
They contain important instructions for installation, proper use and maintenance of the device.
The manufacturer shall not be liable for damages arising out of failure to heed the following instructions:
o
When using electrical components under increased safety requirements, always comply with the appropriate
regulations.
o
Improper installation will render the warranty null and void.
o
Ensure the voltage marked on the power supply unit, matches your main power supply.
o
This device is designed for use indoors.
o
Observe the permissible ambient temperatures for use.
Caution upon installation and usage
o
Humidity
Humidity
Humidity
Humidity: Do not install the product in the place with rain leakage or of high humidity. If the product is leaking,
it may cause damage or fire.
o
Repair:
Repair:
Repair:
Repair: Do not disassemble or remodel the product because it may cause danger such as an electric shock.
When a problem occurs, do not attempt to repair it. Instead, contact the seller.
o
Electricity:
Electricity:
Electricity:
Electricity: Do not use electricity except for what is prescribed here. Using improper electricity may cause an
electric shock or danger.
o
Installation Environment:
Installation Environment:
Installation Environment:
Installation Environment: Do not install the product in a too hot or cold place. (Recommended Temperature :
15ºC ~ 35ºC)
o
Sunlight:
Sunlight:
Sunlight:
Sunlight: Do not expose the camera of the product to the sun or a direct ray of light. It may cause product
damage.
o
Shock or Vibration:
Shock or Vibration:
Shock or Vibration:
Shock or Vibration: Do not drop the product or give it a strong shock or vibration.
o
If the product does not work properly
If the product does not work properly
If the product does not work properly
If the product does not work properly:::: If a problem occurs while using the product (unidentified noise, smell or
smoke), stop using it and turn the power off and contact the seller.
o
Dirt on Lens:
Dirt on Lens:
Dirt on Lens:
Dirt on Lens: Make sure to keep camera lenses clean and away from pollution. If polluted by finger print or
external dirt, cleanse it with cotton stick soacked with 70% Ethyl Alcohol solution or use air blower to remove
the dust.
o
After
After
After
After----Sales Service:
Sales Service:
Sales Service:
Sales Service: When any of the following occurs, turn the power off and have the product repaired at
the place of purchase.
-
Power Connector is damaged
-
The product is leaking
-
Liquid is spilt over the product or it has alien substance.
-
Product does not work as indicated in this manual. (Attempting to operate the product against
manual may cause more serious damage.)
-
Product is dropped to the floor and seriously damaged.
