background image

2

Congratulations on the purchase of a quality product from the Davey Water 

Products range of Pool and Spa Equipment. You are assured of many years 

of reliable and super-efficient performance from your Davey PowerMaster 

ECO-Series pump. 

Read these instructions in their entirety before switching on this pump.  

If you are uncertain as to any of these installation and operating instructions 

please contact your Davey dealer or the appropriate Davey office as listed 

on the back of this document.

Davey PowerMaster ECO has been designed to circulate swimming pool 

and spa water in conditions set out in the Australian Standard for swimming 

pool water quality AS 3633 or equivalent. They should not be used for any 

other purpose without first consulting your Davey Dealer or the Davey 

Customer Service Centre.

Every Davey PowerMaster ECO is thoroughly water tested against a 

number of flow, pressure, voltage, current and mechanical performance 

parameters. Davey`s advanced pump manufacturing technology provides 

reliable and efficient pumping performance that lasts and lasts.

Saving Energy with your Davey PowerMaster 

ECO-Series Pump:

The Davey PowerMaster ECO Series Pool & Spa pump is an 8 Star super 

efficient pump utilising a very clever, state of the art 3 speed brushless DC 

motor that provides lower levels of noise, lower operating costs and lower 

greenhouse emissions than traditional pool pumps. 

Due to its ability to run at lower speeds than conventional pumps, your 

PowerMaster ECO Series pump will also experience less mechanical wear 

and tear due to less stress on the internal mechanical components.  

To achieve energy efficient pumping is easy. Simply 

run the filtration pump at a low speed, but run it for 

longer (see table on page 9) than a conventional 

fixed speed pump to “turn over” your pool water for 

adequate filtration and sanitisation. The result is lower 

energy use and up to 70% lower operational costs. It’s 

like driving your car on a long distance trip at 80 kmh 

instead of 110 kmh. It will take you a lot more time, but 

you will use a lot less fuel!

Summary of Contents for PowerMaster Eco PMECO

















Reviews: