background image

• Page 9 •

Set Timer 1- OFF

3

Set the completion time of the first run time sequence

Select the 

Set Timer 1- OFF

 position on the selector switch. A   

number ‘

3

’ will appear on the left of the screen.

This time is factory pre-set to 8am. Proceed as per (a) in the ‘Set  

Clock’ instruction to change time.

Set Timer 2- ON

4

Set the completion time of the second run time sequence

Select the 

Set Timer 2- ON

 position on the selector switch. A   

number ‘

4

’ will appear on the left of the screen.

This time is factory pre-set to 5pm. Proceed as per (a) in the ‘Set Clock’ 

instruction to change time.

To disable this timer please refer to selector switch position 2 above.

Set Timer 2- OFF

5

Set the completion time of the second run time sequence

Select the 

Set Timer 2- OFF

 position on the selector switch. A   

number ‘

4

’ will appear on the left of the screen.

This time is factory pre-set to 11pm. Proceed as per (a) in the ‘Set 
Clock’ instruction to change time. To disable this timer, see notes on 

selector switch 4.

Automatic ON

6

Filtration system switches on and off automatically according to your  

set times

Select the 

Automatic ON

 position on the selector switch. A number  

6

’ will appear on the left of the screen.

Manual ON

7

Over-rides the automatic time clock settings & switches filtration  

system ON

Select the 

Manual ON 

position on the selector switch. A number ‘

7

’  

will appear on the left of the screen.

NOTE: Chlorination will be constant until turned OFF or back to  

Automatic ON. Over chlorination may occur if left for long durations

OFF

8

Over-rides the automatic time clock settings & switches filtration 

system OFF

Select the 

OFF 

position on the Selector switch. A number ‘

8

’ will  

appear on the left of the screen.

NOTE: Filtration & sanitisation will cease. Not recommended for 

long durations.

Summary of Contents for Monarch EcoSalt BMSC Series

















Reviews: