19
3. SPA
OFF
> Press
menu up/down
buttons to toggle between
SPA MODE
on and off;
> Press
menu/setting select
once your preferred
SPA MODE
is displayed;
> This will then take you back to the first setting menu;
> If the EcoSalt2 is left untouched for ~ 30 seconds, or the
menu/setting cancel (go back)
button is
pushed, the display reverts to the
HOME
screen.
ACTIVATING SPA MODE AND COVER MODE SIMULTANEOUSLY
Should it be necessary to run
SPA MODE
and
COVER MODE
simultaneously, the cell duty cycle is only
reduced by 80% That is, the cell duty cycle isn’t reduced by 80%, followed by a further 80%. The HOME
screen display will toggle between showing
COVER
and
SPA
.
ACTIVATING WINTER MODE
If system is being shut down over the winter period, either turn power off to the
EcoSalt2 or change chlorine output to 0%.
A pool’s exposure to UV contributes significantly to the pool’s total chlorine demand. Ie the amount of
chlorine the pool uses. Bather load is also a significant contributor to the pool’s total chlorine demand. In
winter, the pool’s chlorine demand is typically far less. Unless otherwise altered, if the cell is producing
chlorine, it is producing at 100% current (output).
WINTER MODE
reduces the cell’s current (output) to 85%.
For example:
• If the EcoSalt2 is on for 10 hours per day, the
CHLORINE OUTPUT
is set to 100%, the
WINTER MODE
is
off: the EcoSalt2 cell duty cycle is 10 hours. The cell current will be operating at 100% capacity;
• If the EcoSalt2 is on for 10 hours per day, the
CHLORINE OUTPUT
is set to 100%, but the
WINTER
MODE
is on: while the EcoSalt2 cell duty cycle is still 10 hours, the cell current will only be operating at
85% capacity.
To turn on
WINTER MODE
:
70% – 09:35 AM
CHLORINE OUTPUT
> From the
HOME
screen, press
menu/setting select
.
ENGLISH
ENGLISH
