13
6.3 Main menu display
After initial startup, pressing the
Menu up button
will allow display to scroll through the following:
• Frequency (Hz);
• Outgoing current per phase from the DynaDrive to the pump’s motor (Amps);
• Temperature of the DynaDrive (°C).
To change the display:
• Press the
Menu up button
;
• The display will continue to show the pressure set, but changes from showing actual pressure, to the
frequency of power supplying the motor, see figure 6.7. This dictates the speed that the motor runs;
Figure 6.7
P/
N
:1
611
5-
1 B
Pset 400
Hz 4 1
• Pressing the
Menu up button
again will display the motor current draw per phase, and the
temperature of the DynaDrive controller, see figure 6.8;
Figure 6.8
P/
N
:1
611
5-
1 B
A 1,7
º
C 50
• To change the display back to normal, scroll back through the menu by pressing the
Menu down
button
twice.
Summary of Contents for DynaDrive DD160-19
Page 30: ...30 NOTES...
Page 31: ...31...
