15
ChloroMatic ESC with optional pH Dosing SYSTEM
The ESC unit is a combination of the ESC ChloroMatic sanitiser and a pH monitoring, auto-dosing peristaltic
pump. Please refer to the “Davey Peristaltic Pump AS Series” Installation and Operating Instructions for full
installation details.
IMPORTANT NOTES:
1. The ChloroMatic guarantee does not apply to commercial or semi-commercial installations, i.e. where
the system runs more than an average of 8 hours per day over the year. Guarantee on commercial and
semi-commercial installations is 12 months only on both power supply and cells.
2. ALWAYS INSIST ON GENUINE CHLOROMATIC REPLACEMENT PARTS. If it is necessary to replace the
Electrolytic Cell, beware of “look alikes”. Only the Genuine ChloroMatic Cell is designed and warranted
to operate with the ChloroMatic Power Supply.
SERIOUS DAMAGE MAY RESULT TO THE ELECTRONICS INSIDE THE UNIT IF COPY ELECTRODES ARE
USED AND WILL VOID WARRANTY.
TROUBLE SHOOTING:
No Chlorine Production - Check for
1. Main power outlet switched off
2. Chlorinator not plugged into main outlet
3. Pump not plugged into Chlorinator
4. Time Clock set to Off position/Power switch turned Off
5. Sanitiser Output Control turned to lowest setting
6. Chlorinator fuse blown
7. Dirty Cell
8. Filter needs backwashing
9. Gas Sensor not connected
10. Running times incorrect
11. Main house fuse blown
12. Pump motor faulty
Low Chlorine Production - Check for
1. Dirty Cell - clean if required
2. Filter needs backwashing
3. Display not at correct production level/Cell failing
4. Winter Mode turned On
5. Pool stabiliser too low
6. pH too high
7. Salt level too low
8. Chloromatic running time inadequate
9. Sanitiser output control set too low
Chloromatic pH ready
Power Supply
Optional pH
Peristaltic Pump
Chloromatic 16-40 Cell
ESC50 Cell
DESCRIPTION OF OPERATION
The pH monitoring peristaltic pump has been designed to provide an acid feed in proportion to the difference
between the actual pH of the pool and the pH set point of the pump.
The Total Alkalinity (TA) plays a vital role in the maintenance of the pH. A low TA can distort the reading the unit
receives from the sensor probe, and as a result excessive acid may be fed into the pool.
ALWAYS MAINTAIN TA
ABOVE 100ppm
.
Summary of Contents for ChloroMatic MCS16C
Page 19: ...19...
