CARTRIDGE CLEANING PROCEDURE
7HENTHElLTERGAUGEREADINGISK0AABOVETHECLEANlLTER
gauge reading, cleaning the element cartridge is required. To
perform the cleaning procedure :
3WITCHOFFTHEPUMP
#LOSEISOLATINGVALVESONSUCTIONANDDISCHARGELINESWHERE
fitted.
/PENTHEAIRBLEEDVALVEONTHElLTERLIDUNSCREWTHELOCKRING
and remove the filter lid.
4.
Lift the element out.
5.
In most cases the element can be easily cleaned with a garden
hose, using good velocity sprayed directly on the pleats.
CARTRIDGE RE-ASSEMBLY INSTRUCTIONS
)NSTALLTHECARTRIDGESCENTREPIPESOTHATITISLOCATEDINTHE
bottom spigot.
%NSURETHElLTERLIDORINGISCLEANLUBRICATEDWITHORING
lubricant and located in the bottom groove of the lid.
2EPLACETHELIDANDPRESSlRMLYINPLACE3CREWDOWNTHELOCK
ring, hand tight is sufficient - DO NOT OVERTIGHTEN.
4.
Make sure the pump is primed according to manufacturer’s
directions.
5.
Ensure all valves are open on suction and discharge lines.
6.
Start the pump.
7.
Close the air bleed valve when water is expelled.
WATER QUALITY
Maintaining balanced water chemistry is important to the life of
YOURPOOLPUMP4HISPUMPISDESIGNEDTOBEUSEDWITH0OOL3PA
water, balanced in accordance with Langlier Saturation Index, with
AP(LEVELOFBETWEENANDANDISREGULARLYTREATEDWITHA
CHLORINESANITISINGAGENTWITHTHELEVELNOTEXCEEDING00-
Please consult your local pool shop regularly to have your water
tested.
NOTE: Algae, calcium, clay, sun tan oil and body oils can form a
coating on the element which may not be easily removed with
normal hosing. These materials can be removed by soaking
the element in a de-greaser and/or de-scaler. Your local Davey
Dealer will be able to recommend suitable products.
Failure to undertake regular maintenance may cause damage
not covered by warranty.
s0AGEs
