Dave Smith Instruments TETR4 Operation Manual Download

Page: 32 / 72

Mod Wheel Amount:

-127…+127 —

Sets the maximum amount of modulation

that can be applied from MIDI Continuous Controller 1 (mod wheel).

Mod Wheel Destination

—

Selects the destination to which the mod wheel is

routed. See

Modulation Destinations

on page 35 for a list of possible

destinations.

Press Amount:

-127…+127 —

Sets the maximum amount of modulation that

can be applied from MIDI Channel Pressure (aftertouch).

Press Destination

—

Selects the destination to which the Channel Pressure is

routed. See

Modulation Destinations

on page 35 for a list of possible

destinations.

Breath Amount:

-127…+127 —

Sets the maximum amount of modulation that

can be applied from MIDI Continuous Controller 2 (breath controller).

Breath Destination

—

Selects the destination to which the breath control is

routed. See

Modulation Destinations

on page 35 for a list of possible

destinations.

Veloc Amount:

-127…+127 —

Sets the maximum amount of modulation that

can be applied from MIDI note-on velocity.

Veloc Destination

—

Selects the destination to which the note-on velocity is

routed. See

Modulation Destinations

on page 35 for a list of possible

destinations.

Foot Amount:

-127…+127 —

Sets the maximum amount of modulation that can

be applied from MIDI Continuous Controller 4 (foot controller).

Foot Destination

—

Selects the destination to which the foot control is routed.

See

Modulation Destinations

on page 35 for a list of possible destinations.

Unison Parameters

Unison Mode:

see table

— Sets how voices are allocated and tuned when

unison is on.

Display

Key mode

1 Voice

Classic, two oscillator, monophonic mode

All Voices

All available voices stacked in unison

Summary of Contents for TETR4









































































Search results

Summary of Contents for TETR4

Reviews:

Related manuals for TETR4

Brands by name

Popular brands

Dave Smith Instruments TETR4, Operation Manual

Search results

Summary of Contents for TETR4

Reviews:

Related manuals for TETR4

Brands by name

Popular brands