17
DAVCO Technology, LLC
www.davco.com
800-328-2611
1600 Woodland Drive, Saline, MI 48176-1629
SHOP PRO
®
FXP
WITH 50/80 PSI REGULATOR
TECHNICAL MANUAL
F1348 REV G
DETROIT
®
“DD”
Engines
PRIMING THE ENGINE MODULE OF DETROIT
®
“DD” ENGINES
Regulator Settings: Use the 80 PSI Regulator
setting to prime the fuel module.
1 . Attach the pick-up (60") wand to the suction hose (green)
and insert it into the fuel tank .
2 . Open the ball valve .
3 . Attach the Compucheck Adapter (blue hose) to the
pressure hose (red) on the Shop Pro .
4 . Connect the Compucheck fitting to the priming port on
the fuel module .
5 . Open the ball valve .
6 . Turn the Shop Pro FXP ON . Prime the fuel system for four
minutes .
7 . While the Shop Pro is still turned ON, start the engine .
Allow the engine to idle for one minute before revving the
engine . Turn off the engine .
8 . Turn the Shop Pro off . Close the Shop Pro pressure hose
ball valve . Remove the Compucheck adapter from the fuel
module .
9 . Remove the pick-up wand from the fuel tank .
- Allow the fuel to drain back into the tank before closing
the ball valve .
- Return the adapters to the cart . Return the hoses to the
hose retainers .
10 . Restart the truck and check for leaks .
Summary of Contents for SHOP PRO FXP
Page 2: ......
