3
DAVCO Technology, LLC
www.davco.com
800-328-2611
1600 Woodland Drive, Saline, MI 48176-1629
F1348 REV G
SHOP PRO
®
FXP
WITH 50/80 PSI REGULATOR
TECHNICAL MANUAL
E
General Safety Precautions
• The Shop Pro is only approved for use with diesel fuel .
It is not approved for use with gasoline or any other
flammable liquids .
• Read all instructions before use to avoid injury . To avoid
serious injury or death, follow the safety information in
this document .
• Keep this manual . If you need to replace the manual,
call customer service at 800-328-2611 or visit www .davco .
com for a replacement .
• Read all product safety labels .
• Refer to appropriate regulations for environmental and
workplace safety rules .
• The ignition key must be in the off position, unless oth-
erwise directed . To avoid unintentional engine startup,
use a lockout key and/or signage to alert personnel that
work is being performed .
• Do not leave the Shop Pro running unattended . Always
disconnect the power supply when the Shop Pro is not
in use .
• Avoid fuel spillage . When disconnecting attachments
wrap a shop rag around the fitting to catch any residual
fuel .
E
WARNING: To prevent personal injury
• Eye Protection: Proper eye protection must be worn
when operating the Shop Pro . In case of contact, rinse
immediately with plenty of water, including under the
eyelids, for at least 15 minutes . Consult a doctor .
• Inhalation: Always perform engine or vehicle fuel sys-
tem maintenance in a well ventilated area that is kept
free of bystanders . In case of inhalation, get some fresh
air . If symptoms persist, consult a doctor .
• Skin contact: Use gloves to avoid skin contact . Wash off
immediately with plenty of water . If symptoms persist,
consult a doctor .
• Scalding hazard: When diesel fuel is circulated through
an operating engine, it can become very hot . Use care
when working with hot fuel .
• Fire Prevention: Heated fuel can form combustible
vapor mixtures in the area around the fuel source .
To eliminate the potential for fire, keep open flames,
sparks or other potential ignition sources away from
the work area . Do not smoke during filter replacement
or service operations .
E
Fuel System Precautions:
• Follow engine manufacturer guidelines for proper
priming procedures .
• Dirt or debris in the fuel system can lead to severe
engine damage .
• Blocking and/or clamping the fuel pipes can lead to
severe engine damage .
• Do not operate engine with injector leak circuit
plugged . Damage to injectors may result .
• Never block or plug the common rail release valve
output, this can lead to severe rail and common rail
pressure release valve damage .
• Immediately plug the openings .
• Clean the area before performing maintenance .
• Prevent fuel from leaking or dripping onto the starter
motor .
• Check the fuel components for leakage very carefully .
F
IMPORTANT SAFETY PRECAUTIONS
Summary of Contents for SHOP PRO FXP
Page 2: ......
