CROSS-SLICER
208
Date: 23-2-2016
Version: 06
USERS MANUAL
Page 5
2
DEFINITIONS
2.1
Warnings
The following signs warn the operator for a possible danger because of mechanical or
electrical components.
Figure 2.1.1
Figure 2.1.2
Figure 2.1.1 is a sticker which is used on the machine indicating the sharpness of the knives.
Do not come near the knives when machine is running.
Figure 2.1.2 is a sticker which is used on the machine indicating where electrical power is
present.
Before taking in use of the machine, you should carefully read this manual and follow the
instructions. Make sure that the warning stickers stay in good condition, and if necessary
replace them. When you use the machine for the first time, follow the instructions in this
manual carefully, so that you will not be surprised.
Do not allow unqualified employees to operate the machine.
Only qualified employees may operate the machine.
Be sure the machine is switched off during cleaning, maintenance and lubrication.
After maintenance of the machine do not forget to replace the safety covers, crumbtray and the
lid of the switchbox.
Qualified employees must do all repairs, mechanical as well as electrical.
