background image

3

OPERATING MANUAL

ABOUT YOUR LASER LEVEL

Thank you for purchasing this DATUM CROSSLINE LASER LEVEL. Your laser level features extra 

bright laser technology, horizontal/vertical crossline operations and a pendulum lock. It’s ideal 

for carpentry, interior layout, tiling, plumbing and electrical layout from floor to ceiling.  
Please read and understand the content of this instruction manual before using this product. 

Save this manual for future reference. 

SPECIFICATIONS 

MODEL

DT1H1V2PR

DT1H1V2PG

BEAM COLOUR

RED

GREEN

LASER CLASS

Class II

Class II

LASER WAVELENGTH

635nm

515nm

ACCURACY

±2 mm at 10m

±2 mm at 10m

OPERATING RANGE (INDOOR)

15m

15m

OPERATING RANGE (WITH DETECTOR)

50m

50m

AUTO LEVELLING RANGE

±4°

±4°

BATTERY LIFE (CONTI. OPERATION)

10 Hours

7 Hours

POWER SUPPLY

4 x AA 1.5V batteries 

4  x AA 1.5V batteries 

LINE PATTERN

1H1V 

1H1V 

PLUMB DOTS

Up and Down

Up and Down

IP RATING

IP54

IP54

TRIPOD THREADS

1/4" 

1/4" 

DETECTOR

Optional (Part No. DT01REC sold seperately)

DATUM is constantly improving its products. All information in this manual is based on the latest product information available at the time of
printing. The specifications outlined herein are subject to change without prior notice or obligation. The purchaser and/or user shall assume
liability for any modification and/or alterations of this equipment from original design and manufacture.

HAZARD SIGNAL WORD DEFINITIONS

  

!

Indicates an imminently hazardous situation which, if not avoided, will result 

in death or serious injury. Obey all safety messages that follow this symbol to 

avoid possible injury or death.

          

DANGER

Indicates an imminently hazardous situation which, if not avoided, will result 

in death or serious injury.

          

WARNING

Indicates a potentially hazardous situation which, if not avoided, could result 

in death or serious injury.

          

CAUTION

Indicates a potentially hazardous situation which, if not avoided, may result 

in minor or moderate injury.

CAUTION

Used without the safety alert symbol indicates a potentially hazardous 

situation which, if not avoided, may result in property damage.

!

     

!

     

!

     

Summary of Contents for DT1H1V2PR













Reviews: