Datron TW7201I, Manual

Page: 38 / 106

3: Operation
3-14 TW7201I-MS
ALE Submenu
Descriptions To access ALE functions, enter
ALPHA 17
from the Alpha menu. Navigate
through the ALE menu in one of two ways:
• Press the desired function number, then press
E
or
• Use the arrow buttons to scroll through the menu to the function, then
press
E
.
For information on placing an ALE call, refer to Section 3.7 “Placing an ALE
Call” on page 3-22. For detailed ALE operating instructions, refer to the
7000ALE Radio Control Program Operator Manual (7000ALE-MSOP).
(1) SCAN RATE
For selecting the rate at which scanning proceeds. The
arrow buttons toggle between
2
and
5
channels per
second. The number to the left of the scan rate refers to
option 1 (two seconds per channel) or option 2 (five
seconds per channel).
(2) SCAN GRP
For selecting an ALE scan group (from 0 to 9). This
becomes the specified scan group when using
(3) TUNE
GRP
and
(9) MOD GRP
.
(3) TUNE GRP
For automatically tuning an ALE scan group (from 0 to
9). This tunes all the channels in the selected scan
group.
(4) Rx SELCT
For selecting a receive type:
•
1
for normal ALE receive/transmit (
Rx/Tx
)
•
2
for receive only (
Rx ONLY
)
23 MESSG OUT (message out)
24 NEW MESSG (new message)
25 MESSG IN (message in)
26 HANDSHAKE
27 NET ADRS (network address)
28 NET NAME (network name)
29 NET SLOT (network slot)
30 NET OTHER (network other)
31 SET TO
32 GET LQA
33 EXIT MENU
Table 3-2 ALE Submenu - ALPHA 17 (continued)
ALE
Function Description