5
RM16_EX8
User
Guide
v1.0
‐
DATOptic.com
Figure # 2 Back view
Tools Required
An ESD grounding strap or mat is required. Also required are standard hand tools to open
your system’s case.
System Requirement
The PCI-Express x8 Host adapter can be installed in a PCI Express slot with minimum of 4x ,
x8 or x16 lanes, where the 8x lanes is the default set up
Warning:
High voltages may be found inside computer equipment. Before installing any of the
hardware in this package or removing the protective covers of any computer equipment,
turn off power switches and disconnect power cords. Do not reconnect the power cords until
you have replaced the covers.
Electrostatic Discharge
Static electricity can cause serious damage to the electronic components on this SATA RAID
controller. To avoid damage caused by electrostatic discharge, observe the following
precautions:
Before you handle the RM16_EX8 internal components in any way, touch a
grounded, anti-static surface, such as an unpainted portion of the system chassis, for
a few seconds to discharge any built-up static electricity.
Installation Tools
The following items may be needed to assist with installing the RM16_EX8 raid engine into
an available PCI expansion slot.
Small screwdriver
Host system hardware manuals and manuals for the disk or enclosure being
installed.
Personal Safety Information
To ensure personal safety as well as the safety of the equipment:
Always wear a grounding strap or work on an ESD-protective mat.
Before opening the system cabinet, turn off power switches and unplug the power
cords.
AC
switches
Ethernet
(RJ
‐
45)
it h
PCIe
x8
connection
LCD
Display