Dato CL200, Quick Operation Manual

Page: 5 / 12

Product Installation
The reverse side of the base is in close contact with the wall surface and coincides with
the hole position of the wall surface, and the screw is inserted into the hole and nailed
into the expansion nut in the wall seat position.
Align the hole on the bottom of the camera with the screw on the ring of the base. After
the ring of the camera and the base are tightly fitted, tighten the screws on the back
clockwise. After the camera is fixed, the bottom of the base and the ring can be placed.
Loosen the screw counterclockwise to adjust the vertical angle of the camera. After
adjusting the angle, tighten the screw clockwise.
Wall-mounted installation notes:
* The wall surface needs to be at least 3 times more than the total weight of the camera.
* Please save the bottom device QR code before installing it to the wall.