Datex-Ohmeda S/5 B-ARK, Technical Reference Manual Slot

Page: 17 / 30

S/5 Anesthesia Record Keeping Keyboard and Barcode Reader
Document No. 8001019-3
13
4.1.2 Barcode Reader
Problem Cause Treatment
Barcode Reader does not give a beep
sound Beep sound is OFF. Contact personnel responsible for installing and
configuring the monitors.
Bar Code Beep should be
ON in Monitor Setup - Install/Service - Installation -
Monitor Settings menu. Password is required for the
selection.
Nothing happens when trying to use
the Barcode Reader. Cable connections are not properly
connected. Confirm that the cables are properly connected.
Barcode Reader opens a Search
menu but nothing else happens.
Menu directory does not have a Barcode
Reader file. Contact personnel responsible for installing and
configuring the monitors.
Barcode Reader led flashes and you
may hear a beep sound, but nothing
else happens.
1. Barcodes are not included in the
configuration.
2. Barcode Reader is not correctly
programmed.
3. Monitor is not connected to the
network and the memory module
does not have a menu card inside.
4. Monitor has an old configuration
which is not updated.
5. Old software version on monitor.
1. Contact personnel responsible for installing and
configuring the monitors.
2. Contact personnel responsible for installing and
configuring the monitors. The Barcode Reader
should be reprogrammed. See the instructions
following the Barcode Reader.
3. Connect the monitor to the network or insert a
menu card into the memory module.
4. Contact personnel responsible for installing and
configuring the monitors.
5. Please upgrade your monitor.
NOTE: Possible connecting cables are
881152 and Y-piece or 8001117.
Search result seems to mix different
menu items. Menu files have been modified after
which they have not been recompiled
with the map files. Contact personnel responsible for installing and
configuring the monitors. The menu files have to be
recompiled together with the map files.
See more troubleshooting items on Barcode Reader manual .