Dateq SRL-1, User Manual

Page: 9 / 12

Manual
DATEQ SRL-1
SRL-1 linked to the SPL3, SPL3TS and SPL5
When linked to the SPL3, SPL3TS or SPL5, the SRL-1 will slave to the active state of the
limiter. Limiter setting are automatically set for the SRL-1.
Connection to the SPL3, SPL3TS and SPL5
Signalling Connector (25-SUBD female)
Pen Function SPL3 & SPL3TS Function SPL5
2 Reduction Reduction
3 Overload Overload
4 Warning Live OK
5 live OK Warning
6 Sanction active Level OK
7 Ground Safe sound level
8 Ground SPL-D2 link
14-17 Ground Ground
SRL-1 linked to the SPL-D2
Linked to the SPL-D2, the SRL-1 allows to act as a circuit breaker when exceeding the
preset sound level. Before switching off power a warning light signals the user during
sanction delay. By setting the green/red
threshold point, the SRL-1 maximum sound
level is preset. When exceeding the sound
level the SRL-1 will switch off power after
the preset delay time + 5 seconds.
The SPL-D2 will blink the yellow letters dB
during sanction delay time.
When the sanction reset time has reached
the SRL-1 will restore power.