Dateq BCS25, User Manual

Page: 10 / 28

10
Dateq BCS25 manual BCS25(E) dual line/ microphone input module
EN
Master-cue
Each channel can activate the master-cue function. When the cue-button is pressed the master
module automatically selects the CUE-bus as input. This function can be activated with J10.
DJ-Mode
In a self-support configuration the control room has to be muted when the microphone is opened.
The announcer has to use a headphone, so that acoustical feedback is impossible.
When jumper J11 is set to DJ, the control room will be muted when the channel is activated, all
CUE-functions will be turned off and the master module will select program or audition,
depending on the routing switches.
Cleanfeeds en Auxiliary bus
The BCS25(E) module contains 2 (mono) bus outputs which can be used to create a return signal
to, for example, an ISDN codec. The signal at these busses is post-fader. At each individual
channel of the console can be selected if they belong to one or both of the cleanfeeds by setting
jumpers J4…J7 in the right position.
In the example below the signal of this channel is send to cleanfeed bus 1 only.
Beside the cleanfeeds the BCS25(E) module has 2 auxiliary busses. The first auxiliary is always
pre-fader. Auxiliary 2 can be switched between pre- and postfader by jumper J2 and J3.