background image

7. Attaching a Rechargeable Battery Pack  

 

The WildFire EVO supports the usage of a rechargeable battery pack (not supplied). A 
rechargeable battery pack is used in place of the battery compartment and is usually a sealed 
unit. Rechargeable battery packs are manufactured by a number of first and third party 
manufacturers.  In order to attach a rechargeable battery pack, please follow these steps: 
 

Step 1: 

Whilst pressing and holding the Battery Compartment Button remove the battery 
compartment from the rear of the controller. 

 

Step 2: 

Attach the rechargeable battery pack ensuring that it latches correctly. 

 
7.1. Recharging a Rechargeable Battery Pack 

 

The WildFire EVO allows the recharging of a rechargeable battery pack using the USB 
connection on the WildFire EVO and the USB cable (supplied).  In order to recharge a 
rechargeable battery pack, please follow these steps:  
 

 

 

Step 1:  

Connect the larger end of the USB Cable (supplied) into any free USB port on your Xbox 360.

 

 

Step 2: 

Connect the mini USB end of the USB Cable to the USB Connection located on the top of the  
WildFire EVO.

  

 
 

Other Charging Information 

The WildFire EVO does not support the usage or charging of rechargeable AA batteries.

 

Please 

refer to the information provided with your rechargeable battery pack for approximate 
charging times.  

 
8. Syncing the Controller 

 

Before you can use the WildFire EVO for the first time you need to sync it with your Xbox 360. 
To do this, please follow these steps: 
 

 

 

Step 1: 

Ensuring the Xbox 360 is powered on. Press and hold the Home button or Start button to 
power the controller so you are shown four connected circles on the Combat Command LCD 
Display indicating that the controller is not synced with a console. 
 

Step 2: 

Press the Sync button on your Xbox 360. The actual position of the sync button may differ from 
the illustration. 
 

Step 3: 

Press and hold the Sync button on the WildFire EVO for a number of seconds. After a few 
seconds the WildFire EVO and the Xbox 360 will automatically be synchronized. A player 
number will be assigned to the WildFire EVO and displayed by Player Number Indicator on the 
Combat Command LCD Display. 

Summary of Contents for WildFire EVO










Reviews: