9. Adjusting the Level of Brightness
The Combat Command LCD Display can be set to the preferred level of brightness. In order to
adjust the level of brightness, please follow these steps:
Step 1:
Press and hold the F1 and F2 Buttons
Step 2:
Whilst continuing to press and hold the F1 and F2 buttons increase and decrease the level of
brightness by moving the direction buttons up and down as shown.
10. Entering and Exiting the WildFire EVO Menu
Step 1:
Each time you wish to access the WildFire EVO Menu you need to short tap the Home button
on the WildFire EVO controller. For regular access to the Xbox Guides, hold the Home button
for over one second.
Step 2:
Whilst you are within the WildFire EVO menu the WildFire EVO buttons and controls will only
allow you to control the WildFire EVO menu and console control is suspended. In order to exit
the WildFire EVO Menu and regain control of your console, you need to tap the Home button,
Back button or B button.
11. Activating Features
It is possible to set each of the features to activate in one of five ways. You can choose to
activate and deactivate a feature by pressing the F1 or F2 button. You can choose to activate a
feature when you are pressing and holding the F1 or F2 button. Alternatively you can choose to
have a feature set to always on, meaning that you do not need to press any button to activate
the feature. When activating features you can use multiple instances of some features such as
Rapid Fire and Sniper.
When you have entered the WildFire EVO menu as detailed in the previous section, using the
Left Analog Stick or the Direction buttons enables you can scroll between the four features.
With the feature which you wish to activate highlighted, using the X button on the WildFire
EVO you can toggle the highlighted feature between the five different activation modes. Each
of the activation modes is indicated by an icon being added to the highlighted feature as
follows:
12. Pre-installed Features
The WildFire EVO is preinstalled with the features Sniper, Remap, Rapid Fire and Low recoil.
Each of the pre-installed features is easily identifiable by the following feature images:
1
1
1
OR
<
A
B
Sniper Mode
Remap
Rapid Fire
Low Recoil